Why this matters
Statistics is scoring: a four-mark question asks you to build a frequency table from raw data, and one-mark questions ask for the range, a class mark or a class size. The tables you make here are the input for the graphs and averages in the next two lessons and for the whole Class 10 statistics chapter.
The idea
Data are facts or figures collected for a definite purpose. Data collected by the investigator with a definite purpose in mind are primary data; data taken from a source that already collected them, such as a government report, are secondary data.
Raw data are the observations exactly as collected, in no order. Raw data are hard to read, so we organise them. Arranging observations in increasing or decreasing order gives an array. The range of the data is the difference between the highest and lowest observations; the range of 12, 25, 7, 30, 18 is 30 − 7 = 23.
The frequency of an observation is the number of times it occurs. A frequency distribution table lists each observation with its frequency. For a small number of distinct values we use an ungrouped frequency distribution, counting with tally marks in bunches of five, where the fifth stroke is drawn across the previous four.
When the data spread over many values we group them. A grouped frequency distribution collects the observations into classes such as 0–10, 10–20 and 20–30, called class intervals. In the class 10–20, the number 10 is the lower limit and 20 is the upper limit. The class size or class width is the difference between the upper and lower limits, here 10. The class mark is the midpoint of a class, found as (upper limit + lower limit) ÷ 2, so the class mark of 10–20 is 15.
There are two ways of writing classes. In the exclusive form the classes are 0–10, 10–20, 20–30; an observation equal to an upper limit, such as 10, is placed in the next class 10–20, so each class includes its lower limit but not its upper limit. In the inclusive form the classes are 1–10, 11–20, 21–30, and both limits belong to the class. To draw a histogram from an inclusive table, convert it to the exclusive form by subtracting 0.5 from each lower limit and adding 0.5 to each upper limit, giving 0.5–10.5, 10.5–20.5 and so on.
To build a grouped table, find the range, choose a class size that gives about 5 to 10 classes, write the classes, tally each observation into its class, and add the frequencies to confirm they equal the number of observations.
Worked examples
Example 1: An ungrouped frequency table
Question: The marks (out of 10) of 20 students are 5, 7, 8, 5, 6, 9, 7, 5, 8, 6, 7, 10, 5, 6, 8, 7, 9, 6, 7, 8. Prepare a frequency table.
- List the distinct marks: 5, 6, 7, 8, 9, 10.
- Tally each: 5 occurs 4 times, 6 occurs 4 times, 7 occurs 5 times, 8 occurs 4 times, 9 occurs 2 times, 10 occurs once.
- Check the total: 4 + 4 + 5 + 4 + 2 + 1 = 20.
Answer:
| Marks | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|
| Frequency | 4 | 4 | 5 | 4 | 2 | 1 |
Example 2: A grouped frequency table
Question: The monthly electricity bills (₹) of 20 houses are 320, 450, 610, 280, 530, 720, 390, 460, 580, 340, 690, 410, 500, 270, 640, 380, 550, 470, 600, 350. Make a grouped frequency table with class size 100 starting from 250.
- Range = 720 − 270 = 450, so five classes of size 100 cover the data: 250–350, 350–450, 450–550, 550–650, 650–750 (exclusive form).
- Tally: 250–350 has 320, 280, 340, 270 (4); 350–450 has 450 excluded but 390, 410, 380, 350 (4); 450–550 has 450, 530, 460, 500, 470 (5); 550–650 has 610, 580, 640, 550, 600 (5); 650–750 has 720, 690 (2).
- Check: 4 + 4 + 5 + 5 + 2 = 20.
Answer: Frequencies 4, 4, 5, 5, 2 for the five classes.
Example 3: Inclusive to exclusive
Question: Convert the classes 10–19, 20–29, 30–39 to the exclusive form and find their class marks and class size.
- The gap between 19 and 20 is 1, so adjust by half of it, 0.5.
- Exclusive classes: 9.5–19.5, 19.5–29.5, 29.5–39.5.
- Class marks: (9.5 + 19.5) ÷ 2 = 14.5, then 24.5, then 34.5. Class size: 19.5 − 9.5 = 10.
Answer: Classes 9.5–19.5, 19.5–29.5, 29.5–39.5; class marks 14.5, 24.5, 34.5; class size 10.
Common mistakes
- Putting an observation equal to an upper limit in the wrong class. In exclusive classes, 350 belongs to 350–450, not to 250–350.
- Forgetting to check that the frequencies add up to the number of observations.
- Taking the class size of 10–19 as 9. After conversion it is 19.5 − 9.5 = 10.
- Confusing range (highest minus lowest) with class size.
Try it yourself
- Find the range of 12, 25, 7, 30, 18.
- Find the class mark of the class 40–50.
- Write the class 21–30 in exclusive form.
Answers: 1. 23. 2. 45. 3. 20.5–30.5.