Why this matters
The cylinder is the most common solid in exam questions, from water tanks and pipes to pillars and tins: expect a two-mark formula question and a four-mark cost or capacity problem. Cylinder formulas are also the base for the cone and for the combined solids of Class 10.
The idea
A right circular cylinder is the solid obtained when a rectangle is rotated about one of its sides, so that its two ends are equal circles and its axis is perpendicular to the ends. A tin of oil, a pipe and a road roller are cylinders. It is described by the radius r of its circular base and its height h.
Picture the label on a tin. If you cut it along its height and open it out, it becomes a rectangle of length 2πr, the circumference of the base, and breadth h. So the curved surface area of a cylinder is the area of its curved side and equals 2πrh.
The total surface area of a cylinder is the curved surface area together with the two circular ends, each of area πr², so it equals 2πrh + 2πr² = 2πr(r + h).
The volume of a cylinder is the area of the base multiplied by the height and equals πr²h. This matches the cuboid rule, base area times height, with a circle as the base.
A hollow cylinder, such as a pipe, has an outer radius R and an inner radius r. Its curved surface area counts both surfaces, 2πRh + 2πrh = 2πh(R + r), and the volume of the material is the difference of two cylinders, π(R² − r²)h.
| Quantity | Formula |
|---|---|
| Curved surface area | 2πrh |
| Total surface area | 2πr(r + h) |
| Volume | πr²h |
| Hollow cylinder, volume of material | π(R² − r²)h |
Unless the question says otherwise, take π = 22/7, and choose radii that are multiples of 7 or 3.5 to cancel the 7. Questions often give the diameter; halve it before using any formula. A ratio trick saves time when two quantities are known: volume ÷ curved surface area = πr²h ÷ 2πrh = r ÷ 2, so r can be found at once.
Worked examples
Example 1: All three formulas
Question: A cylinder has radius 7 cm and height 10 cm. Find its curved surface area, total surface area and volume.
- Curved surface area = 2πrh = 2 × (22/7) × 7 × 10 = 440 cm².
- Area of the two ends = 2πr² = 2 × (22/7) × 49 = 308 cm².
- Total surface area = 440 + 308 = 748 cm².
- Volume = πr²h = (22/7) × 49 × 10 = 1540 cm³.
Answer: 440 cm², 748 cm² and 1540 cm³.
Example 2: Capacity of a tank
Question: A cylindrical water tank has diameter 1.4 m and height 2 m. How many litres does it hold?
- Radius = 1.4 ÷ 2 = 0.7 m.
- Volume = (22/7) × 0.7 × 0.7 × 2 = (22/7) × 0.49 × 2 = 1.54 × 2 = 3.08 m³.
- 1 m³ = 1000 litres, so capacity = 3080 litres.
Answer: 3080 litres.
Example 3: Finding r and h from two quantities
Question: The curved surface area of a cylinder is 264 cm² and its volume is 924 cm³. Find its radius and height.
- Volume ÷ curved surface area = r ÷ 2, so r ÷ 2 = 924 ÷ 264 = 3.5 and r = 7 cm.
- Curved surface area: 2 × (22/7) × 7 × h = 264, so 44h = 264 and h = 6 cm.
- Check the volume: (22/7) × 49 × 6 = 924. Correct.
Answer: Radius 7 cm, height 6 cm.
Common mistakes
- Using the diameter as the radius. Halve it first.
- Adding only one circular end to the curved surface area. A closed cylinder has two ends; an open tin or a pipe may need one or none, so read the question.
- Writing πrh instead of 2πrh for the curved surface; the width of the unrolled rectangle is the full circumference.
- Forgetting the unit change: cubic metres to litres needs × 1000.
Try it yourself
- Find the volume of a cylinder of radius 3.5 cm and height 10 cm.
- Find the curved surface area of a cylinder of radius 14 cm and height 5 cm.
- A cylinder of radius 7 cm has volume 1540 cm³. Find its height.
Answers: 1. (22/7) × 12.25 × 10 = 385 cm³. 2. 2 × (22/7) × 14 × 5 = 440 cm². 3. 1540 ÷ 154 = 10 cm.