Class 9 Physical Science · chapter 1

Matter in Our Surroundings 5-minute revision

3 revision cards, one per concept lesson — key terms, what to remember, a quick check. Read a card, then open the lesson if something is hazy.

1 Matter in Our Surroundings

Key terms - Matter: anything that has mass and occupies space - Diffusion: intermixing of particles of two kinds of matter on their own - Kinetic energy of particles: energy of motion; increases with temperature - Force of attraction: the pull between particles; strongest in solids, weakest in gases

Must remember - Four characteristics of particles: very small, spaces between them, continuously moving, attract each other - KMnO₄ dilution shows how small particles are; sugar in water shows spaces - Rate of diffusion increases with temperature - Panch Tatva: air, earth, fire, sky, water

Quick check 1. Which activity shows that particles have spaces between them? (Sugar or salt dissolving with no rise in water level) 2. Does diffusion happen faster in cold water or hot water? (Hot water) 3. Why does a stream of water not break when you cut it with a finger? (Water particles attract each other)

Key terms - Solid: definite shape, fixed volume, rigid, negligible compressibility - Liquid: fixed volume, no fixed shape, flows (fluid) - Gas: no fixed shape or volume, highly compressible, fills the container - Pressure of a gas: force per unit area from particles hitting the walls - Density: mass ÷ volume

Must remember - K = °C + 273; 0 °C = 273 K, 100 °C = 373 K; no degree sign with K - 1 atm = 1.01 × 10⁵ Pa - Order of diffusion rate: gas most, then liquid, then solid - LPG and CNG are compressed gases in cylinders; sponge and rubber band are solids

Quick check 1. 310 K in Celsius? (37 °C) 2. Which state has the strongest forces between particles? (Solid) 3. Why do gases fill any container they are put in? (Particles move fast in all directions with negligible attraction)

Key terms - Melting point: temperature at which a solid becomes liquid at atmospheric pressure - Latent heat of fusion: heat to change 1 kg of solid to liquid at its melting point - Latent heat of vaporisation: heat to change 1 kg of liquid to gas at its boiling point - Sublimation: solid to gas (or gas to solid) without the liquid state - Evaporation: surface change of liquid to vapour below the boiling point

Must remember - Ice melts at 273 K (0 °C); water boils at 373 K (100 °C) - Ice: 3.34 × 10⁵ J/kg; water to steam: 22.5 × 10⁵ J/kg; Q = m × L - Evaporation increases with surface area, temperature and wind speed, decreases with humidity - Evaporation causes cooling: earthen pot, sweating, acetone on palm

Quick check 1. Temperature during melting rises, falls or stays constant? (Stays constant) 2. Name the solid form of CO₂. (Dry ice) 3. Why do clothes dry slowly on a rainy day? (High humidity slows evaporation)