Class 9 Physical Science · chapter 2: Is Matter Around Us Pure · lesson 4 of 12

Pure substances, mixtures and solutions

About 40 minutes

Why this matters

This lesson carries the numericals of Chapter 2. A two- or three-mark question on the concentration of a solution appears almost every year, and the definitions of solution, solute, solvent and saturated solution are common one-mark questions. Solutions return in Class 10 acids and bases and in Class 11 chemistry.

The idea

A shopkeeper in Vijayawada sells "pure ghee" and "pure milk". For a chemist the word pure means something stricter. A pure substance is a substance that consists of a single type of particle and has a fixed composition. Water, sodium chloride, copper and oxygen are pure substances. Milk, ghee, soil, sea water and air are not, because each contains several kinds of particles.

Mixtures

A mixture is a substance formed by mixing two or more pure substances in any proportion without any chemical change. The components keep their own properties and can be separated by physical methods. Mixtures are of two types.

  • A homogeneous mixture is a mixture that has a uniform composition throughout. Salt in water, sugar in water and copper sulphate solution look the same in every part. The proportion can vary: one glass may have a spoon of salt, another two spoons.
  • A heterogeneous mixture is a mixture that has physically distinct parts with a non-uniform composition. Sand mixed with salt, oil in water, and iron filings with sulphur powder are heterogeneous.

Solutions

A solution is a homogeneous mixture of two or more substances. Lemonade, soda water and brass are all solutions. The solvent is the component of a solution that is present in the larger amount and dissolves the other; the solute is the component that is present in the smaller amount and gets dissolved. In sugar solution, water is the solvent and sugar the solute. Solutions need not be liquid. Air is a gaseous solution of oxygen and other gases in nitrogen. Brass is a solid solution, an alloy, of about 30% zinc in 70% copper. In soda water, carbon dioxide gas is the solute in water. In tincture of iodine, solid iodine is dissolved in alcohol.

A true solution has these properties.

  • It is homogeneous.
  • Its particles are smaller than 1 nm (10⁻⁹ m) in diameter and cannot be seen even with a microscope.
  • It does not scatter a beam of light, so the path of light through it is not visible.
  • The solute cannot be separated by filtration, and the solution is stable: the particles do not settle on standing.

Saturated and unsaturated solutions

Keep adding sugar to a cup of water and stirring. At some point no more dissolves. A saturated solution is a solution in which no more solute can be dissolved at a given temperature. A solution that can still dissolve more solute is an unsaturated solution. The solubility of a substance is the maximum amount of solute that dissolves in 100 g of solvent at a given temperature. Solubility of most solids increases with temperature; a saturated solution at 313 K dissolves more than at 293 K, so on cooling the extra solute separates out as crystals. Different substances have different solubilities in the same solvent.

Concentration of a solution

A solution with a lot of solute is concentrated; with little solute it is dilute. The concentration of a solution is the amount of solute present in a given amount of solution or solvent. Three ways are used.

MethodFormula
Mass by mass percentage(mass of solute ÷ mass of solution) × 100
Mass by volume percentage(mass of solute ÷ volume of solution) × 100
Volume by volume percentage(volume of solute ÷ volume of solution) × 100

Mass of solution = mass of solute + mass of solvent. Students lose marks by dividing by the mass of the solvent instead of the solution.

Worked examples

Example 1: Mass by mass percentage

Question: 40 g of common salt is dissolved in 320 g of water. Find the concentration in terms of mass by mass percentage.

  1. Mass of solution = 40 + 320 = 360 g.
  2. Concentration = (40 ÷ 360) × 100.
  3. = 11.1%.

Answer: 11.1% (mass by mass).

Example 2: Saturated solution

Question: A saturated solution of sodium chloride at 293 K contains 36 g of salt in 100 g of water. What is its mass by mass percentage?

  1. Mass of solution = 36 + 100 = 136 g.
  2. Concentration = (36 ÷ 136) × 100.
  3. = 26.47%, about 26.5%.

Answer: 26.5% (mass by mass).

Example 3: Preparing a solution

Question: How would you prepare 250 g of a 12% (mass by mass) sugar solution?

  1. Mass of sugar = 12% of 250 = (12 ÷ 100) × 250 = 30 g.
  2. Mass of water = 250 − 30 = 220 g.
  3. Dissolve 30 g sugar in 220 g water.

Answer: 30 g sugar and 220 g water.

Common mistakes

  • Dividing by the mass of solvent instead of the mass of solution when finding mass by mass percentage.
  • Calling every clear liquid a pure substance. Salt solution is clear but it is a mixture.
  • Saying that a saturated solution cannot dissolve any solute at all. It cannot dissolve more at that temperature; warming it usually lets it dissolve more.
  • Writing that the solvent is always water. In tincture of iodine the solvent is alcohol; in brass it is copper.

Try it yourself

  1. 20 g of glucose is dissolved in 180 g of water. Find the mass by mass percentage.
  2. 10 mL of alcohol is mixed with water to make 50 mL of solution. Find the volume by volume percentage.
  3. Find the mass of sugar needed to make 300 g of a 5% sugar solution, and the mass of water required.

Answers: 1. Solution = 200 g; (20 ÷ 200) × 100 = 10%. 2. (10 ÷ 50) × 100 = 20%. 3. Sugar = 5% of 300 = 15 g; water = 285 g.

Quiz

Five questions built from this lesson. Start at Core; the level adapts to your score.

Flashcards

Turn the key terms of this lesson into cards that come back just before you forget them.