Class 9 Mathematics · whole course

Class 9 Mathematics 5-minute revision

44 revision cards, one per concept lesson — key terms, what to remember, a quick check. Read a card, then open the lesson if something is hazy.

1 Real Numbers

Key terms - Rational number: a number of the form p/q, p and q integers, q ≠ 0 - Irrational number: a real number that cannot be written as p/q - Real numbers: all rational and irrational numbers together

Must remember - Between any two rationals there are infinitely many rationals; use the mean (a + b) ÷ 2 or equal denominators - √2, √3, √5, π are irrational; √4, √9, 22/7, 0.333… are rational - √2 comes from a right triangle with legs 1 and 1; √5 from legs 2 and 1 - To draw √x: AB = x, BC = 1, semicircle on AC, perpendicular at B gives BD = √x

Quick check 1. Is √25 rational? (yes, it equals 5) 2. One rational between 2/3 and 3/4 (17/24, using denominator 24: 16/24 and 18/24) 3. Legs of the triangle used for √13 (2 and 3)

Key terms - Terminating decimal: stops after finitely many digits (7/8 = 0.875) - Recurring decimal: a block of digits repeats forever (0.(27)) - Non-terminating non-recurring decimal: never stops, never repeats, always irrational - Period: the length of the repeating block, at most q − 1 for p/q

Must remember - Rational ⇔ terminating or recurring; irrational ⇔ non-terminating non-recurring - To convert 0.(ab): x = 0.(ab), 100x − x = ab, x = ab/99 - Mixed case 0.2(3): 100x − 10x = 21, x = 21/90 = 7/30 - 1/7 = 0.(142857), 1/3 = 0.(3), 1/9 = 0.(1)

Quick check 1. Type of 1/6 = 0.1666…? (non-terminating recurring) 2. 0.(7) as a fraction? (7/9) 3. Give an irrational number between 0.3 and 0.4 (0.3010010001…)

Key terms - Surd: an irrational root such as √2 or √7 - Conjugate: √a − √b is the conjugate of √a + √b; their product is a − b - Rationalising: removing the root from a denominator by multiplying top and bottom - a^(1/n): the positive nth root of a

Must remember - Rational + irrational = irrational; irrational + irrational may be rational (√2 − √2 = 0) - √a × √b = √(ab); (a + √b)(a − √b) = a² − b - 1/√2 = √2/2; 1/(√3 + √2) = √3 − √2 - a^m × a^n = a^(m + n); (a^m)^n = a^(mn); a^(−n) = 1/a^n; a^0 = 1 - Write the base as a prime power first: 32^(−2/5) = 2^(−2) = 1/4

Quick check 1. (√11 + √3)(√11 − √3) = ? (8) 2. Rationalise 1/(2 + √3) (2 − √3) 3. 27^(2/3) = ? (9)

2 Polynomials and Factorisation

Key terms - Polynomial: a sum of terms, each a real coefficient times a whole-number power of x - Degree: the highest power of x with a non-zero coefficient - Coefficient: the number multiplying a power of x - Zero of p(x): a real number a with p(a) = 0

Must remember - Linear ax + b (degree 1), quadratic ax² + bx + c (degree 2), cubic (degree 3) - Zero of ax + b is x = −b/a - Non-zero constant has no zero; degree of the zero polynomial is not defined - A polynomial of degree n has at most n zeroes - x + 1/x and √x + 2 are not polynomials

Quick check 1. Degree of 5 − 2x + 7x⁵? (5) 2. Zero of 3x + 9? (−3) 3. Is p(x) = x² + 1 zero at x = 1? (no, p(1) = 2)

Key terms - Division algorithm: p(x) = g(x) q(x) + r(x), with r(x) = 0 or degree of r less than degree of g - Remainder theorem: remainder on dividing p(x) by x − a is p(a) - Factor theorem: x − a is a factor of p(x) if and only if p(a) = 0

Must remember - Divisor x + 3 means substitute x = −3; divisor 2x − 1 means x = 1/2 - Remainder 0 means the divisor is a factor - Unknown coefficient: write p(a) = 0 (factor) or p(a) = given remainder, then solve

Quick check 1. Remainder when x² + 5x + 6 is divided by x + 3? (0) 2. Substitute what for divisor 3x + 2? (x = −2/3) 3. Is x − 2 a factor of x³ − 8? (yes, 8 − 8 = 0)

Key terms - Factorisation: writing a polynomial as a product of factors - Splitting the middle term: find p + q = b and pq = ac for ax² + bx + c

Must remember - (x ± y)² = x² ± 2xy + y²; (x + y + z)² adds 2xy + 2yz + 2zx - (x + y)³ = x³ + y³ + 3xy(x + y); (x − y)³ = x³ − y³ − 3xy(x − y) - x³ + y³ = (x + y)(x² − xy + y²); x³ − y³ = (x − y)(x² + xy + y²) - If x + y + z = 0 then x³ + y³ + z³ = 3xyz

Quick check 1. Factorise 4a² − 25 ((2a + 5)(2a − 5)) 2. 99² using an identity? (9801) 3. Factorise 3x² + 12x + 12 (3(x + 2)²)

3 The Elements of Geometry

Key terms - Geometry: from geo (earth) and metron (measure) - Point: that which has no part; zero dimensions - Line: breadthless length; one dimension; its ends are points - Surface: length and breadth only; two dimensions; its edges are lines - Theorem: a statement proved from axioms, postulates and definitions

Must remember - Point, line, plane are undefined terms in modern geometry - Axiom: assumed, general to mathematics; postulate: assumed, specific to geometry - Euclid of Alexandria, about 300 BC, thirteen books called the Elements - Sulbasutras (Baudhayana) state the right-triangle relation; Harappan bricks 4 : 2 : 1 - Thales gave the first proof; Egyptians measured land after Nile floods

Quick check 1. Dimensions of a solid? (three) 2. Who wrote the Elements? (Euclid) 3. Is the whole is greater than the part an axiom or a theorem? (axiom)

Key terms - Axiom (common notion): assumption true for all magnitudes, not only figures - Postulate: assumption specific to geometry - Terminated line: a line segment with two end points

Must remember - Seven axioms: equal to same thing; equals added; equals subtracted; coincide; whole greater than part; doubles equal; halves equal - Five postulates: line through two points; segment can be extended; circle with any centre and radius; all right angles equal; the parallel (fifth) postulate - Textbook version of postulate 1: through two distinct points there is a unique line - Theorem: two distinct lines cannot have more than one point in common

Quick check 1. Which axiom: the whole is greater than the part? (axiom 5) 2. Number of Euclid's postulates? (five) 3. AC + BC = AB and AC = BC gives AC = ? (½ AB)

Key terms - Fifth postulate: interior angles on one side summing to less than 180° means the lines meet on that side - Parallel lines: lines in a plane that never meet however far extended - Playfair's axiom: through a point not on a line there is exactly one parallel to it

Must remember - Interior angles summing to exactly 180° means the lines are parallel, so the postulate implies parallels exist - Two distinct intersecting lines cannot both be parallel to the same line - On a sphere, lines are great circles, there are no parallels, triangle angle sum exceeds 180°

Quick check 1. Angles 85° and 95° on the same side of a transversal: do the lines meet? (no, sum is 180°) 2. Who gave the version with exactly one parallel? (John Playfair) 3. Angle sum of a triangle on a plane? (180°)

4 Lines and Angles

Key terms - Line segment: part of a line between two end points; ray: starts at a point, extends one way - Complementary angles: two angles adding to 90° - Supplementary angles: two angles adding to 180° - Adjacent angles: common vertex, common arm, other arms on opposite sides - Linear pair: adjacent angles whose outer arms form a straight line; sum 180°

Must remember - Acute below 90°, right 90°, obtuse between 90° and 180°, straight 180°, reflex above 180° - Complement of x is 90° − x; supplement of x is 180° − x - Every linear pair is supplementary; not every supplementary pair is a linear pair - Ratio problems: add the parts and equate to 90° or 180°

Quick check 1. Complement of 64°? (26°) 2. Supplement of 90°? (90°) 3. Angles 2x and 3x form a linear pair; x = ? (36°)

Key terms - Linear pair axiom: a ray standing on a line makes adjacent angles adding to 180°, and conversely - Vertically opposite angles: non-adjacent angles formed by two intersecting lines - Angle bisector: a ray dividing an angle into two equal angles - Angles around a point: sum to 360°

Must remember - Vertically opposite angles are equal (proved using two linear pairs) - Bisectors of a linear pair are perpendicular - If one angle at an intersection is 90°, all four are 90° - Always write the reason next to each step in a proof

Quick check 1. Lines cross; one angle is 40°; the other three? (140°, 40°, 140°) 2. Adjacent angles on a line are 2x and x; x = ? (60°) 3. Sum of all angles around a point? (360°)

Key terms - Transversal: a line cutting two or more lines at distinct points - Corresponding angles: same position at the two crossings, same side of the transversal - Alternate interior angles: between the lines, opposite sides of the transversal - Co-interior (allied) angles: between the lines, same side of the transversal

Must remember - Parallel lines: corresponding equal, alternate equal, co-interior add to 180° - Converses prove lines parallel: equal corresponding or alternate angles, or supplementary co-interior angles - Lines parallel to the same line are parallel to each other - With parallel lines all acute angles at the crossings are equal, all obtuse angles are equal, and acute + obtuse = 180°

Quick check 1. l ∥ m, one angle 72°; a co-interior angle to it? (108°) 2. Alternate angles 55° and 55°: parallel? (yes) 3. Corresponding angles 2x and 80° with parallel lines; x = ? (40°)

Key terms - Angle sum property: the three angles of a triangle add to 180° - Exterior angle: angle between one side and the extension of another side at a vertex - Interior opposite angles: the two angles of the triangle not adjacent to the exterior angle

Must remember - Proof of angle sum: draw a line through one vertex parallel to the opposite side, use alternate angles - Exterior angle = sum of the two interior opposite angles, so it is greater than each of them - Exterior angle + adjacent interior angle = 180° (linear pair) - One exterior angle at each vertex: total 360°

Quick check 1. Angles 90° and 35°; third angle? (55°) 2. Interior opposite angles 50° and 60°; exterior angle? (110°) 3. Can a triangle have angles 100° and 90°? (no, sum exceeds 180°)

5 Co-ordinate Geometry

Key terms - x-axis: the horizontal number line; y-axis: the vertical one; origin O: where they cross - Abscissa: the x-co-ordinate, distance from the y-axis - Ordinate: the y-co-ordinate, distance from the x-axis - Quadrants: the four regions I, II, III, IV numbered anticlockwise from upper right

Must remember - Signs: I (+, +), II (−, +), III (−, −), IV (+, −) - Points on the x-axis are (a, 0); on the y-axis are (0, b); origin (0, 0) - (x, y) is an ordered pair: (2, 5) and (5, 2) are different points - The system is named after René Descartes

Quick check 1. Quadrant of (4, −9)? (IV) 2. Where is (0, 6)? (on the y-axis) 3. Ordinate of (−3, −8)? (−8)

Key terms - Plotting: marking a point from its co-ordinates, x-move first then y-move - Scale: the length on paper standing for one unit - Reflection in the x-axis: (x, y) becomes (x, −y) - Reflection in the y-axis: (x, y) becomes (−x, y)

Must remember - Distance from the x-axis is the size of the ordinate; from the y-axis the size of the abscissa - Same ordinate means a horizontal segment; length is the difference of abscissas - Same abscissa means a vertical segment; length is the difference of ordinates - Label axes, mark the scale, write co-ordinates beside each point

Quick check 1. Distance of (−5, 2) from the y-axis? (5 units) 2. Image of (3, −4) in the x-axis? ((3, 4)) 3. Length from (−2, 6) to (5, 6)? (7 units)

Key terms - Horizontal segment: same ordinate at both ends; length is the difference of abscissas - Vertical segment: same abscissa at both ends; length is the difference of ordinates - x = a: a vertical line, parallel to the y-axis, through (a, 0) - y = b: a horizontal line, parallel to the x-axis, through (0, b)

Must remember - Equation of the x-axis is y = 0; of the y-axis is x = 0 - Midpoint of a horizontal segment: average of the abscissas, same ordinate - Right triangle with legs on the grid: area = ½ × base × height

Quick check 1. Equation of the line through (−4, 5) parallel to the y-axis? (x = −4) 2. Length from (2, −3) to (2, 9)? (12 units) 3. Area of the triangle (0, 0), (6, 0), (6, 4)? (12 square units)

6 Linear Equations in Two Variables

Key terms - Linear equation in two variables: an equation of the form ax + by + c = 0 with a and b not both zero. - Standard form: every term moved to the left so the right side is 0. - Solution: an ordered pair (x, y) that makes the equation true. - Ordered pair: x is written first, y second.

Must remember - A linear equation in two variables has infinitely many solutions. - To find a solution, choose x, solve for y, write (x, y). - If a variable is missing, its coefficient is 0: y = 4 is 0x + y − 4 = 0. - When moving a term across the equals sign, change its sign.

Quick check 1. Standard form of 2y = 3x + 1? (3x − 2y + 1 = 0) 2. Is (3, 2) a solution of x + y = 5? (Yes) 3. How many solutions does x + y = 5 have? (Infinitely many)

Key terms - Graph of a linear equation: the set of all points whose coordinates satisfy it; always a straight line. - x-intercept: where the line cuts the x-axis, found by putting y = 0. - y-intercept: where the line cuts the y-axis, found by putting x = 0. - Scale: the length chosen on each axis for one unit.

Must remember - Every point on the line is a solution and every solution is a point on the line. - Plot three points, not two, to catch errors. - y = kx always passes through the origin (0, 0). - Label the axes, the scale and the equation.

Quick check 1. Where does x + y = 5 cut the y-axis? (At (0, 5)) 2. Does (2, 4) lie on y = 2x? (Yes) 3. What shape is the graph of 3x − y = 7? (A straight line)

Key terms - x = a: a line parallel to the y-axis through (a, 0). - y = b: a line parallel to the x-axis through (0, b). - Equation of the x-axis: y = 0. - Equation of the y-axis: x = 0.

Must remember - On the number line x = 3 is a point; in the plane it is a vertical line. - x = a and y = b meet at the single point (a, b). - Negative a puts the line x = a to the left of the y-axis; negative b puts y = b below the x-axis. - Solve equations like 2y + 6 = 0 before drawing.

Quick check 1. Which axis is the line y = −2 parallel to? (The x-axis) 2. Equation of the line through (5, 7) parallel to the y-axis? (x = 5) 3. Where do x = 3 and y = −1 meet? (At (3, −1))

7 Triangles

Key terms - Congruent triangles: same shape and size; corresponding sides and angles equal. - Correspondence: the order of letters in ΔABC ≅ ΔPQR tells which vertex matches which. - Included angle: the angle between two given sides. - CPCT: corresponding parts of congruent triangles are equal.

Must remember - Criteria: SAS (axiom), ASA, AAS, SSS. - AAA and SSA are not criteria. - A proof needs three equalities with reasons, the criterion, then CPCT. - Common sides and vertically opposite angles are the usual hidden equal parts.

Quick check 1. Which criterion needs all three sides? (SSS) 2. ΔABC ≅ ΔPQR; which angle equals ∠B? (∠Q) 3. Is two angles and a non-included side enough? (Yes, AAS)

Key terms - RHS criterion: two right triangles are congruent if the hypotenuse and one side are equal. - Isosceles triangle: a triangle with two equal sides. - Base angles: the two angles at the ends of the unequal side. - Equilateral triangle: all sides equal, every angle 60°.

Must remember - Angles opposite equal sides are equal, and sides opposite equal angles are equal. - Base angle = (180° − vertical angle) ÷ 2. - In an isosceles triangle the bisector of the vertical angle, the median and the altitude from that vertex coincide. - The hypotenuse is the side opposite the right angle and is the longest side.

Quick check 1. Vertical angle 80°; base angles? (50° each) 2. ∠A = ∠B in ΔABC; which sides are equal? (BC = AC) 3. Which criterion works only for right triangles? (RHS)

Key terms - Triangle inequality: the sum of any two sides is greater than the third side. - Corollary: the difference of any two sides is less than the third side. - Opposite side: the side that does not touch the vertex of the angle. - Perpendicular distance: the shortest segment from a point to a line.

Must remember - Longer side faces the larger angle; larger angle faces the longer side. - Three lengths form a triangle only if the two smaller add to more than the largest. - Third side lies strictly between the difference and the sum of the other two. - The hypotenuse is the longest side of a right triangle.

Quick check 1. Can sides 2, 3, 6 form a triangle? (No) 2. Two sides 5 and 9; range of the third? (Between 4 and 14) 3. In ΔABC, ∠C is the largest angle; longest side? (AB)

8 Quadrilaterals

Key terms - Quadrilateral: a closed figure with four sides, four angles and two diagonals. - Parallelogram: both pairs of opposite sides parallel. - Rhombus: a parallelogram with all sides equal. - Rectangle: a parallelogram with all angles 90°. - Square: a rectangle with all sides equal.

Must remember - Angle sum of a quadrilateral = 360°. - Diagonals of a parallelogram bisect each other; of a rectangle they are also equal; of a rhombus they are also perpendicular; of a square all three. - Every square is a rectangle and a rhombus; every rectangle and rhombus is a parallelogram. - Ratio questions: find x first, then multiply back.

Quick check 1. Angles 90°, 90°, 120°; fourth angle? (60°) 2. Which parallelogram has perpendicular diagonals but not necessarily equal ones? (Rhombus) 3. Is every rhombus a square? (No)

Key terms - Parallelogram: a quadrilateral with both pairs of opposite sides parallel. - Alternate angles: the equal angles made by a transversal with two parallel lines; they drive every proof here. - Co-interior angles: angles on the same side of a transversal between parallel lines; they add to 180°. - Converse: the test that turns a property into a way of proving a figure is a parallelogram.

Must remember - A diagonal splits a parallelogram into two congruent triangles. - Opposite sides equal; opposite angles equal; adjacent angles supplementary. - Diagonals bisect each other (equal only in rectangles and squares). - Tests: opposite sides equal, opposite angles equal, diagonals bisect each other, or one pair of opposite sides equal and parallel.

Quick check 1. One angle of a parallelogram is 40°; the adjacent angle? (140°) 2. Diagonals of a quadrilateral bisect each other; what is it? (A parallelogram) 3. Which criterion proves ΔABC ≅ ΔCDA using diagonal AC? (ASA)

Key terms - Mid-point theorem: the segment joining the midpoints of two sides is parallel to the third side and half of it. - Converse: a line through the midpoint of one side, parallel to a second side, bisects the third side. - Midpoint: the point that divides a segment into two equal parts. - Corresponding angles: equal angles made by a transversal with parallel lines.

Must remember - DE = (1/2) BC, never BC. - The midpoint triangle has half the perimeter and splits the triangle into four congruent triangles. - Midpoints of any quadrilateral joined in order give a parallelogram; of a rhombus a rectangle; of a rectangle a rhombus. - Always draw a diagonal first in quadrilateral questions.

Quick check 1. BC = 12 cm; length of the segment joining the midpoints of AB and AC? (6 cm) 2. Which congruence criterion is used in the proof of the theorem? (SAS) 3. Midpoints of the sides of a square joined in order form? (A square)

9 Statistics

Key terms - Primary data: collected by the investigator; secondary data: taken from an existing source. - Range: highest observation minus lowest. - Frequency: the number of times an observation or class occurs. - Class mark: (upper limit + lower limit) ÷ 2. - Class size: upper limit minus lower limit.

Must remember - Exclusive classes 0–10, 10–20: an observation equal to 10 goes into 10–20. - Inclusive to exclusive: subtract 0.5 from lower limits and add 0.5 to upper limits. - Tally in bunches of five with the fifth stroke across. - Frequencies must add to the total number of observations.

Quick check 1. Class mark of 30–40? (35) 2. In classes 0–10, 10–20, where does 20 go? (Into 20–30) 3. Exclusive form of 11–20? (10.5–20.5)

Key terms - Bar graph: separated bars of equal width for categories; height shows the value. - Histogram: touching rectangles on continuous classes; area shows frequency. - Frequency polygon: line joining (class mark, frequency) points, closed to the axis. - Adjusted frequency: (minimum class size ÷ class size) × frequency.

Must remember - Histogram rectangles have no gaps; bar graphs have gaps. - Unequal widths: adjust heights so areas stay proportional. - Polygon x-values are class marks, and add a zero-frequency class at each end. - Draw a kink on the x-axis when the first class does not start at 0.

Quick check 1. Height for class 20–40, frequency 10, minimum width 10? (5) 2. Class mark of 40–60? (50) 3. Which graph has gaps between bars? (Bar graph)

Key terms - Mean: sum of observations divided by their number. - Median: the middle value after arranging in order. - Mode: the observation that occurs most often. - Measure of central tendency: one number that represents the whole data.

Must remember - Mean = ∑xᵢ ÷ n; for a table, mean = ∑fᵢxᵢ ÷ ∑fᵢ. - Median: n odd, the ((n + 1) ÷ 2)th value; n even, the mean of the (n ÷ 2)th and (n ÷ 2 + 1)th values. - Sum = n × mean; fix a wrong entry by correcting the sum. - Mean is affected by extremes; median is not.

Quick check 1. Median of 5, 1, 9, 3? (4) 2. Mean of 7, 9, 14? (10) 3. Mode of 1, 2, 2, 3, 3, 3? (3)

10 Surface Areas and Volumes

Key terms - Cuboid: a solid with six rectangular faces; dimensions l, b, h. - Cube: a cuboid with all edges equal to a. - Lateral surface area: area of the four side faces only. - Total surface area: area of all six faces. - Volume: the space a solid occupies, in cubic units.

Must remember - Cuboid: LSA = 2h(l + b), TSA = 2(lb + bh + hl), V = lbh, diagonal = √(l² + b² + h²). - Cube: LSA = 4a², TSA = 6a², V = a³, diagonal = a√3. - 1 m³ = 1000 litres; 1 litre = 1000 cm³. - Four walls means LSA; closed box means TSA; capacity means volume.

Quick check 1. TSA of a cube of edge 3 cm? (54 cm²) 2. Volume of a cuboid 5 × 4 × 2 cm? (40 cm³) 3. Litres in 2 m³? (2000)

Key terms - Right circular cylinder: a solid with two equal circular ends and an axis perpendicular to them. - Curved surface area: the area of the curved side, a rectangle 2πr by h when unrolled. - Total surface area: curved surface plus two circular ends. - Hollow cylinder: a pipe with outer radius R and inner radius r.

Must remember - CSA = 2πrh, TSA = 2πr(r + h), V = πr²h. - Hollow: material volume = π(R² − r²)h. - Volume ÷ CSA = r ÷ 2. - Halve the diameter before using any formula; π = 22/7 unless told otherwise.

Quick check 1. CSA of a cylinder r = 7 cm, h = 2 cm? (88 cm²) 2. Volume r = 7 cm, h = 5 cm? (770 cm³) 3. How many circular ends does a closed cylinder have? (Two)

Key terms - Right circular cone: the solid made by rotating a right triangle about one leg. - Slant height l: distance from the vertex to the edge of the base. - Curved surface area: the sector-shaped surface, area πrl. - Total surface area: curved surface plus the circular base.

Must remember - l = √(r² + h²); find the missing one of r, h, l first. - CSA = πrl, TSA = πr(l + r), V = (1/3)πr²h. - Cone volume is one third of the cylinder with the same base and height. - Canvas, sheet, cloth means CSA; grain, sand, water means volume.

Quick check 1. r = 5, h = 12; slant height? (13) 2. CSA of a cone r = 7 cm, l = 10 cm? (220 cm²) 3. Cylinder volume 600 cm³; cone of same base and height? (200 cm³)

Key terms - Sphere: all points in space at distance r from the centre; no edge, no vertex, no flat face. - Hemisphere: half a sphere, with one flat circular face. - Surface area of a sphere: 4πr², equal to the curved surface of the cylinder that just contains it. - Diameter: twice the radius; halve it before using any formula.

Must remember - Sphere: SA = 4πr², V = (4/3)πr³. - Hemisphere: CSA = 2πr², TSA = 3πr², V = (2/3)πr³. - Radius doubled: area × 4, volume × 8. - Radii a : b gives areas a² : b² and volumes a³ : b³.

Quick check 1. Surface area of a sphere r = 7 cm? (616 cm²) 2. TSA of a hemisphere r = 7 cm? (462 cm²) 3. Radii 1 : 2; ratio of volumes? (1 : 8)

11 Areas

Key terms - Area: the measure of the region enclosed by a plane figure, in square units. - Congruent figures: same shape and same size; they have equal areas. - Same base, same parallels: figures sharing a side, with opposite vertices on one line parallel to it.

Must remember - Parallelograms on the same base and between the same parallels are equal in area. - Area of parallelogram = base × height; area of triangle = ½ × base × height. - A diagonal splits a parallelogram into two triangles of equal area.

Quick check 1. Base 9 cm, height 4 cm: area of the parallelogram? (36 cm²) 2. Which congruence rule proves ΔADE ≅ ΔBCF in the theorem? (AAS) 3. Two parallelograms on the same base and between the same parallels have areas 20 cm² and x cm². Find x. (20)

Key terms - Median: a segment from a vertex to the midpoint of the opposite side. - Height of a triangle: the perpendicular from a vertex to the opposite side (the base).

Must remember - Triangles on the same base and between the same parallels have equal areas. - Triangle on the same base as a parallelogram, between the same parallels, has half its area. - A median splits a triangle into two equal areas; the two parts need not be congruent. - Both diagonals of a parallelogram make four triangles of equal area.

Quick check 1. Area of ΔABC is 50 cm² and AD is a median. Area of ΔABD? (25 cm²) 2. Parallelogram of area 64 cm² and a triangle on the same base between the same parallels: triangle area? (32 cm²) 3. Base 10 cm, height 7 cm: triangle area? (35 cm²)

12 Circles

Key terms - Chord: a segment joining two points on a circle; a diameter is a chord through the centre. - Distance of a chord from the centre: length of the perpendicular from the centre to the chord. - Arc, segment, sector: part of the circle; region between chord and arc; region between two radii and an arc.

Must remember - Equal chords subtend equal angles at the centre, and conversely. - The perpendicular from the centre bisects the chord; the bisector through the centre is perpendicular. - Equal chords are equidistant from the centre, and conversely. - (half chord)² + d² = r². - Exactly one circle passes through three non-collinear points.

Quick check 1. Radius 10 cm, chord 12 cm: distance from centre? (8 cm) 2. Which rule proves ΔOMA ≅ ΔOMB when OM ⊥ AB? (RHS) 3. The longest chord of a circle is called? (the diameter)

Key terms - Angle subtended by an arc: the angle formed by joining the ends of the arc to a point. - Segment of a circle: the region between a chord and an arc; major or minor. - Concyclic points: points that lie on one circle.

Must remember - Angle at the centre = 2 × angle at any point on the remaining arc. - Angles in the same segment are equal. - Angle in a semicircle is 90°; a chord subtending 90° at the circle is a diameter. - Angles at points on opposite arcs of the same chord add to 180°. - Equal chords cut congruent arcs and subtend equal angles at the centre.

Quick check 1. Central angle 80°: angle on the major arc? (40°) 2. Angle in a semicircle? (90°) 3. Two angles in the same segment measure 3x and 60°. Find x. (20)

Key terms - Cyclic quadrilateral: a quadrilateral with all four vertices on one circle. - Circumscribed circle: the circle passing through all vertices of a figure. - Exterior angle: the angle between one side produced and the adjacent side.

Must remember - In a cyclic quadrilateral, ∠A + ∠C = 180° and ∠B + ∠D = 180°. - Converse: opposite angles supplementary means the quadrilateral is cyclic. - Exterior angle = interior opposite angle. - Rectangles, squares and isosceles trapeziums are cyclic; a non-square rhombus is not. - A cyclic parallelogram must be a rectangle.

Quick check 1. Cyclic ABCD with ∠B = 80°: ∠D? (100°) 2. Exterior angle at C is 115°: ∠A? (115°) 3. Angles 100°, 60°, 80°, 120° in order around a quadrilateral: cyclic? (Yes, 100 + 80 = 180 and 60 + 120 = 180)

13 Geometrical Constructions

Key terms - Construction: a figure drawn with only a straight edge and compass. - Perpendicular bisector: the line through the midpoint of a segment at right angles to it. - Angle bisector: the ray dividing an angle into two equal angles. - Justification: the congruence argument that shows a construction is correct.

Must remember - Perpendicular bisector: equal arcs from both ends, radius more than half the segment; justified by the rhombus. - Angle bisector: justified by SSS congruence. - 60° comes from an equilateral triangle; 90° from bisecting between 60° and 120°. - 30°, 45°, 75°, 105°, 135° all come from bisecting.

Quick check 1. Which congruence rule justifies the angle bisector? (SSS) 2. 75° is obtained by bisecting which angle? (the 30° between 60° and 90°) 3. Minimum compass radius for the perpendicular bisector of AB? (more than half of AB)

Key terms - Helper triangle: the larger triangle drawn first, using the sum, difference or perimeter as a side. - Perpendicular bisector property: every point on it is equidistant from the two ends.

Must remember - Sum case: cut BD = AB + AC on ray BX, bisect DC, A is on BD. - Difference case: cut BD = AB − AC on BX, bisect DC, A is on BX beyond D. - Perimeter case: XY = perimeter, half of each base angle at X and Y, bisect AX and AY. - Justification: AD = AC (or BX = BA and CY = CA).

Quick check 1. Sum case: which segment gets the perpendicular bisector? (DC) 2. Perimeter case with ∠B = 90°: angle constructed at X? (45°) 3. Which property makes AD = AC? (A lies on the perpendicular bisector of DC)

14 Probability

Key terms - Experiment: an action whose result cannot be predicted in advance. - Trial: one performance of the experiment. - Outcome: a possible result of a trial; event: a set of outcomes we are interested in. - Experimental probability: favourable trials divided by total trials.

Must remember - P(E) = (trials in which E happened) ÷ (total trials). - 0 ≤ P(E) ≤ 1. - Probabilities of all outcomes of an experiment add to 1. - More trials bring the experimental value closer to the expected value. - Always simplify the fraction.

Quick check 1. 40 heads in 100 tosses: P(head)? (0.4) 2. Can a probability be 1.2? (No, it must lie between 0 and 1) 3. P(head) = 0.55 in an experiment: P(tail)? (0.45)

Key terms - Frequency table: a table listing outcomes or class intervals with the number of times each occurred. - Class interval: a range of values grouped together, upper end excluded. - Complement of E: the event that E does not happen. - Survey: information collected from a group; probability refers to one member picked at random.

Must remember - P(row) = frequency of row ÷ total frequency. - For several rows, add the frequencies first. - P(not-E) = 1 − P(E). - All row probabilities add to 1; use this as a check. - "At least one" = 1 − P(none).

Quick check 1. Frequencies 12, 18, 20 in three rows; probability of the second row? (18/50 = 0.36) 2. P(E) = 0.28: P(not-E)? (0.72) 3. Rows 60 to 80 (33) and 80 to 100 (30) out of 100 students: P(60 or more)? (0.63)

15 Proofs in Mathematics

Key terms - Statement: a sentence that is either true or false, not both. - Axiom: a statement accepted without proof. - Theorem: a statement proved from axioms and earlier theorems. - Conjecture: a statement believed true but not proved. - Negation: the statement asserting the opposite.

Must remember - Questions, commands, exclamations and opinions are not statements. - An open sentence like x + 3 = 7 becomes a statement only when x is fixed. - Negation of "all A are B" is "some A is not B". - Goldbach's conjecture: every even number greater than 2 is a sum of two primes; unproved.

Quick check 1. Is "Is 17 prime?" a statement? (No, it is a question) 2. "The square of every natural number is even": true or false? (False, 3² = 9) 3. A statement accepted without proof is called? (an axiom)

Key terms - Deductive reasoning: reaching a conclusion from accepted statements by logic. - Hypothesis and conclusion: the "if" part and the "then" part of a statement. - Converse: "if q then p" obtained from "if p then q". - Counterexample: one case that breaks a general statement.

Must remember - Even = 2m, odd = 2m + 1, consecutive = n and n + 1. - One counterexample disproves; many examples never prove. - n² + n + 41 fails at n = 40 (1681 = 41²).

Quick check 1. Hypothesis of "if x is a multiple of 4, then x is even"? (x is a multiple of 4) 2. Counterexample to "all rectangles are squares"? (a 2 × 3 rectangle) 3. Write 2m + 2n as a product to show it is even. (2(m + n))

Key terms - Proof by contradiction: assume the statement is false, derive an impossibility, conclude it is true. - Contradiction: a conclusion that conflicts with the assumption or a known fact.

Must remember - Step 1 is always "assume the opposite". - If p² is even then p is even (square of an odd number is odd). - √2 proof: p² = 2q² → p even → q even → common factor 2, contradiction. - Rational + irrational = irrational; N = p₁p₂...pₙ + 1 gives a new prime.

Quick check 1. First line of the proof that √2 is irrational? (Assume √2 = p/q in lowest terms) 2. Why is p even when p² is even? (an odd number squared is odd) 3. In Euclid's proof, the remainder when N is divided by any listed prime? (1)