Class 9 Physical Science · whole course

Class 9 Physical Science 5-minute revision

12 revision cards, one per concept lesson — key terms, what to remember, a quick check. Read a card, then open the lesson if something is hazy.

1 Matter in Our Surroundings

Key terms - Matter: anything that has mass and occupies space - Diffusion: intermixing of particles of two kinds of matter on their own - Kinetic energy of particles: energy of motion; increases with temperature - Force of attraction: the pull between particles; strongest in solids, weakest in gases

Must remember - Four characteristics of particles: very small, spaces between them, continuously moving, attract each other - KMnO₄ dilution shows how small particles are; sugar in water shows spaces - Rate of diffusion increases with temperature - Panch Tatva: air, earth, fire, sky, water

Quick check 1. Which activity shows that particles have spaces between them? (Sugar or salt dissolving with no rise in water level) 2. Does diffusion happen faster in cold water or hot water? (Hot water) 3. Why does a stream of water not break when you cut it with a finger? (Water particles attract each other)

Key terms - Solid: definite shape, fixed volume, rigid, negligible compressibility - Liquid: fixed volume, no fixed shape, flows (fluid) - Gas: no fixed shape or volume, highly compressible, fills the container - Pressure of a gas: force per unit area from particles hitting the walls - Density: mass ÷ volume

Must remember - K = °C + 273; 0 °C = 273 K, 100 °C = 373 K; no degree sign with K - 1 atm = 1.01 × 10⁵ Pa - Order of diffusion rate: gas most, then liquid, then solid - LPG and CNG are compressed gases in cylinders; sponge and rubber band are solids

Quick check 1. 310 K in Celsius? (37 °C) 2. Which state has the strongest forces between particles? (Solid) 3. Why do gases fill any container they are put in? (Particles move fast in all directions with negligible attraction)

Key terms - Melting point: temperature at which a solid becomes liquid at atmospheric pressure - Latent heat of fusion: heat to change 1 kg of solid to liquid at its melting point - Latent heat of vaporisation: heat to change 1 kg of liquid to gas at its boiling point - Sublimation: solid to gas (or gas to solid) without the liquid state - Evaporation: surface change of liquid to vapour below the boiling point

Must remember - Ice melts at 273 K (0 °C); water boils at 373 K (100 °C) - Ice: 3.34 × 10⁵ J/kg; water to steam: 22.5 × 10⁵ J/kg; Q = m × L - Evaporation increases with surface area, temperature and wind speed, decreases with humidity - Evaporation causes cooling: earthen pot, sweating, acetone on palm

Quick check 1. Temperature during melting rises, falls or stays constant? (Stays constant) 2. Name the solid form of CO₂. (Dry ice) 3. Why do clothes dry slowly on a rainy day? (High humidity slows evaporation)

2 Is Matter Around Us Pure

Key terms - Pure substance: a single kind of particle, fixed composition - Solution: a homogeneous mixture of two or more substances - Solute: the component dissolved (smaller amount); solvent: the component that dissolves it (larger amount) - Saturated solution: cannot dissolve more solute at that temperature - Solubility: maximum solute in 100 g of solvent at a given temperature

Must remember - Mass by mass % = (mass of solute ÷ mass of solution) × 100; solution = solute + solvent - Solution particles under 1 nm; no Tyndall effect; cannot be filtered; stable - Air, brass and soda water are all solutions; solubility of solids rises with temperature

Quick check 1. 25 g salt in 100 g water: mass by mass %? (20%) 2. Solvent in tincture of iodine? (Alcohol) 3. Is brass a compound or a solution? (A solid solution, an alloy)

Key terms - Suspension: heterogeneous mixture whose particles are visible and settle on standing - Colloid: heterogeneous mixture that appears homogeneous; particles scatter light and do not settle - Dispersed phase: the scattered solute-like part; dispersion medium: the bulk solvent-like part - Tyndall effect: scattering of light by colloidal particles, making the beam visible

Must remember - Particle sizes: solution under 1 nm, colloid 1 to 1000 nm, suspension larger - Tyndall effect: colloids and suspensions yes, solutions no - Aerosol (fog, smoke), foam (shaving cream), emulsion (milk), sol (mud), gel (jelly), solid sol (gemstone) - Colloids are separated by centrifugation, not filtration

Quick check 1. Does salt solution show the Tyndall effect? (No) 2. Milk is which type of colloid? (Emulsion, liquid in liquid) 3. Which mixture settles on standing: suspension or colloid? (Suspension)

Key terms - Physical change: only physical properties change; no new substance - Chemical change: new substances with different chemical properties are formed - Element: cannot be broken into simpler substances by a chemical reaction - Compound: two or more elements chemically combined in a fixed proportion by mass - Metalloid: element with properties between metals and non-metals (B, Si, Ge)

Must remember - Mercury is a liquid metal; bromine a liquid non-metal - Iron + sulphur heated → iron sulphide (FeS): not attracted to a magnet, gives H₂S with dilute acid - A compound has fixed composition and new properties; a mixture has variable composition and keeps the properties of its parts - Water H:O = 1:8 by mass

Quick check 1. Rusting of iron: physical or chemical? (Chemical) 2. Which gas does an iron and sulphur mixture give with dilute H₂SO₄? (Hydrogen) 3. Is air an element, compound or mixture? (Mixture)

3 Atoms and Molecules

Key terms - Law of conservation of mass: mass can neither be created nor destroyed in a chemical reaction (Lavoisier) - Law of constant proportions: in a chemical substance the elements are always present in definite proportions by mass (Proust) - Atom: the smallest particle of an element that takes part in a chemical reaction - Parmanu: Kanad's name for the indivisible particle

Must remember - Water H:O = 1:8, ammonia N:H = 14:3, carbon dioxide C:O = 3:8 by mass - Mass of reactants = mass of products; do the check in a closed flask - Dalton, 1808: atoms indivisible, identical within an element, combine in small whole-number ratios - Excess reactant stays unreacted; the product mass follows the fixed ratio

Quick check 1. 4 g of hydrogen combines with how much oxygen to form water? (32 g) 2. Which postulate of Dalton explains conservation of mass? (Atoms cannot be created or destroyed) 3. 2 g H₂ + 16 g O₂ → how much water? (18 g)

Key terms - Atomic mass unit (u): one-twelfth of the mass of a carbon-12 atom - Molecule: two or more atoms chemically bonded; smallest particle that exists independently - Atomicity: number of atoms in a molecule of an element - Ion: charged particle; cation positive, anion negative - Valency: combining capacity of an element or ion

Must remember - Atomic masses: H 1, C 12, N 14, O 16, Na 23, Mg 24, S 32, Cl 35.5, Ca 40 - Diatomic: H₂, O₂, N₂, Cl₂; O₃ triatomic; P₄; S₈; noble gases monoatomic - Polyatomic ions: NH₄⁺, OH⁻, NO₃⁻, SO₄²⁻, CO₃²⁻, PO₄³⁻ - Criss-cross valencies, reduce common factors, brackets for a repeated polyatomic ion

Quick check 1. Formula of aluminium sulphate? (Al₂(SO₄)₃) 2. Symbol of sodium and the Latin name it comes from? (Na, natrium) 3. Atomicity of sulphur? (8)

Key terms - Molecular mass: sum of atomic masses of all atoms in a molecule, in u - Formula unit mass: the same sum for the formula unit of an ionic compound - Mole: amount containing 6.022 × 10²³ particles, as many as atoms in 12 g of carbon-12 - Molar mass: mass of one mole in grams - Avogadro number: 6.022 × 10²³

Must remember - n = mass ÷ molar mass; mass = n × molar mass; N = n × 6.022 × 10²³ - H₂O 18, CO₂ 44, NH₃ 17, CH₄ 16, HNO₃ 63, H₂SO₄ 98, NaCl 58.5 - Molecular mass in u, molar mass in g; numerically the same - Gases like O₂ and N₂ are diatomic when finding molar mass

Quick check 1. Molar mass of CaCO₃? (100 g) 2. Moles in 36 g of water? (2 mol) 3. Number of atoms in 24 g of carbon? (2 × 6.022 × 10²³ = 1.204 × 10²⁴)

4 Structure of the Atom

Key terms - Electron: negatively charged particle, charge −1, mass about 1/2000 of a hydrogen atom (Thomson, 1897) - Proton: positively charged particle, charge +1, mass 1 u (from Goldstein's canal rays) - Nucleus: tiny, dense, positively charged centre of the atom (Rutherford) - Alpha particle: doubly charged helium ion He²⁺, mass 4 u

Must remember - Thomson: plum pudding, electrons embedded in a positive sphere - Gold foil: most pass through, some deflect, 1 in 12000 bounce back - Rutherford: nucleus with almost all the mass, electrons revolve in orbits, atom mostly empty; nucleus radius about 10⁵ times smaller than the atom - Drawback: a revolving electron should radiate energy and fall into the nucleus

Quick check 1. Who discovered the electron? (J. J. Thomson) 2. What conclusion follows from most alpha particles passing straight through? (Most of the atom is empty space) 3. What is an alpha particle? (A doubly charged helium ion, He²⁺)

Key terms - Discrete orbit (shell, energy level): an allowed path in which an electron does not radiate energy - Neutron: neutral particle in the nucleus with mass equal to a proton (Chadwick, 1932) - Electronic configuration: number of electrons in each shell, written 2, 8, 1 - Valence electrons: electrons in the outermost shell - Valency: electrons lost, gained or shared to complete the octet

Must remember - Shell capacity 2n²: K 2, L 8, M 18, N 32; outermost never more than 8 - Na 2, 8, 1; Cl 2, 8, 7; Ar 2, 8, 8; K 2, 8, 8, 1; Ca 2, 8, 8, 2 - Valency = valence electrons if 4 or fewer, else 8 minus valence electrons; noble gases 0 - Hydrogen has no neutron

Quick check 1. Configuration of oxygen (8)? (2, 6) 2. Valency of aluminium, 2, 8, 3? (3) 3. Which postulate of Bohr makes the atom stable? (Electrons in discrete orbits do not radiate energy)

Key terms - Atomic number Z: number of protons in the nucleus - Mass number A: protons + neutrons (nucleons) - Isotopes: same element, same Z, different A - Isobars: different elements, same A, different Z - Average atomic mass: isotope masses weighted by percentage abundance

Must remember - Neutrons = A − Z; electrons = Z in a neutral atom - Hydrogen isotopes: protium, deuterium, tritium - Chlorine: 35 and 37 in the ratio 3:1 gives 35.5 u - Uses: uranium isotope as nuclear fuel, cobalt isotope for cancer, iodine isotope for goitre - ⁴⁰Ca and ⁴⁰Ar are isobars

Quick check 1. Neutrons in ³⁷₁₇Cl? (20) 2. Do isotopes have the same chemical properties? (Yes) 3. Average atomic mass of an element that is 90% mass 16 and 10% mass 18? (16.2 u)